The first drafting meeting of the hottest solid ro

2022-07-25
  • Detail

The first drafting meeting of the testing standard for thermosetting rotary offset printing was held on December 1st, 2011. It was undertaken by UPM (China) Co., Ltd, National Printing Standardization Technical Committee (sac/tc 170) "printing suitability requirements and inspection methods for thermosetting rotary offset coated paper" No. 1 of the national standard drafting group. The biggest loss was that the performance of materials could not be measured immediately when the characteristics of fluorosilicone new materials were needed by the industrial cluster. The working meeting was held in Changshu, Jiangsu Province

more than 10 experts and technicians from Jindong paper (Jiangsu) Co., Ltd., Anhui Publishing vocational and technical college, Tianjin Toyo Ink Co., Ltd., Hunan Yueyang Forest Paper Co., Ltd., China business United Printing (Guangdong) Co., Ltd., publishing School of Hangzhou University of Electronic Science and technology, and Beijing Shengtong Printing Co., Ltd. attended the conference. According to the spirit of the meeting, the experts of the drafting group of the conference carefully discussed and studied the framework, content and technical details of the first draft of the standard drafting group drafted by Jindong paper (Jiangsu) Co., Ltd., and put forward specific modification opinions on the draft. Some terms and definitions were modified, such as deleting the two terms of web printing and offset printing, modifying thermosetting rotary offset printing Terms and definitions for light coated paper and coated paper. According to the spirit of "content serving printing", the technical indicators that are not closely related to printing quality, such as quantitative, quantitative deviation, printing gloss and surface pH, are deleted, and the names of technical indicators such as folding resistance, expansion rate and two-sided difference are added

at this conference, the drafting unit was arranged to test the relevant technical indicators, and it was required to summarize the test data to Jindong paper (Jiangsu) Co., Ltd. by the end of February 2012. These data to be analyzed will be from the software functions and performance characteristics of the tensile stripping tester of the publishing School of Hangzhou University of Electronic Science and technology. How much do you know? The hospital shall assist the first to determine the position that can be landed. Finally, the conference determined that the second draft of the standard drafting group should be completed by the end of March, 2012, and the second drafting group is scheduled to be held in Anhui Publishing vocational and technical college in April, 2012

Copyright © 2011 JIN SHI